The TDS-8SA belongs to NOV’s larger-capacity top drive range. Treat it as a separate model from the 500-ton TDS-11 family when organising equipment records and parts requests.
TDS-8SA published reference specifications
| Parameter | Published reference |
|---|---|
| Published hoisting capacity | 750 short tons |
| Published motor power | 1 × 1,150 hp |
| Published maximum continuous torque | 62,250 ft-lb |
These are document reference values, not confirmation of a particular machine’s configuration or fitness for service. Confirm the serial number, drawing revision and installed options before selection.
Configuration details still needed
The headline ratings above come from NOV’s model table. Working height, installed weight, motor details, IBOP connections, washpipe arrangement and pipe-handler configuration must be confirmed from the equipment-specific datasheet. We do not substitute TDS-11SA figures where TDS-8SA information has not been verified.
Identify the assembly before the individual component
Start with the machine serial number and drawing set. Record which load path and installed assembly the requirement concerns. For mechanical components, specify the bearing, seal or gear drawing position; for electrical components, include the component tag and connection reference.
TDS-8SA component and spare-parts enquiry map
| Component group | Information needed to identify the part |
|---|---|
| Fluid-path and washpipe enquiries | Installed assembly number, pressure requirement and sealing arrangement |
| Valve and pipe-handling enquiries | IBOP, actuator and pipe-handler assembly identification |
| Drive-train replacement enquiries | Installed transmission drawing and exact component item number |
| Motor and electrical enquiries | Nameplates, VFD identification and service-loop drawings |
This is a component enquiry map, not a verified parts bill of materials. Exact part numbers and compatibility will be added only when supported by the correct manufacturer parts list or equipment records. Listing a component group does not confirm availability.
TDS-8SA versus TDS-8S: keep the source designation
NOV’s online model directory uses TDS-8SA. Its Top Drive Technologies brochure also contains a table headed TDS-8S. Preserve those labels when collecting specifications: a similar name or matching headline rating is not enough to confirm every installed component.
| Source designation | What is published | How to use it in a parts enquiry |
|---|---|---|
| TDS-8SA — NOV online model table | 750-ton hoisting capacity; one 1,150 hp motor; 62,250 ft-lb maximum continuous torque | Identify the model family, then obtain the machine-specific datasheet and assembly drawings. |
| TDS-8S — NOV Top Drive Technologies brochure | 24 ft working height, 38,000 lb weight, 8.5:1 gearing and PH-100 pipe handler in the illustrated reference configuration | Keep these as TDS-8S source values. Do not silently relabel them as confirmed TDS-8SA installation data. |
NOV online model directory · NOV Top Drive Technologies brochure. Document labels checked 16 November 2026. The brochure is a reference source, not an as-built record for your serial number.
Build the TDS-8SA requirement by assembly
Start with one clear assembly per quotation line. If you have only a photograph, include the wider assembly as well as the component label; a close-up alone can lose the context needed to distinguish similar items.
| Requirement | Identification package |
|---|---|
| Washpipe, packing or sealing components | Installed assembly reference, bore, rated pressure requirement, existing seal/packing arrangement and drawing item |
| IBOP valve or actuator | Upper/lower position, valve and actuator identifiers, exact connections and whether a component or complete assembly is required |
| Pipe handler or link-tilt item | Installed pipe-handler designation, assembly serial/reference and the cylinder, pin or other component item position |
| Transmission, bearing or seal | Gearbox identification, drawing revision, item position and any documented modification |
| Motor, cooling or electrical item | Motor/component nameplate, voltage and frequency where applicable, circuit tag and connector or cable drawing |
Request a TDS-8SA assembly-specific quotation
Questions before ordering TDS-8SA parts
Can a TDS-8S listing prove compatibility with TDS-8SA?
Not on its own. Preserve the source model name and request a match against the installed machine’s serial number and assembly revision. A supplier should state the basis for the proposed compatibility.
Can the TDS-11SA parts page be used for this model?
Use the TDS-11SA page for that separate model’s requirement. Do not substitute its connections, pipe-handler details or replacement references into a TDS-8SA order without supporting documentation.
What if the original part number is missing?
Send the model and serial, assembly drawing if available, component location and photographs. State what documentation is missing. Identification can then be reviewed before a quotation describes a proposed match.
How should a kit or independently manufactured replacement be described?
List required inclusions, quantities, drawing revision, material and inspection requirements. The quotation should identify the proposed manufacturer and condition, and distinguish OEM supply from an independently manufactured replacement. This page does not establish a complete bill of materials or availability.
Prepare a TDS-8SA equipment or parts RFQ
Request model-specific parts
Send the equipment model and serial number, assembly drawing/revision, part number and item position, quantity, photographs and delivery destination. State the required condition, origin, inspection and documentation. The quotation should confirm source, scope, compatibility basis, lead time and any exceptions.
Request TDS-8SA equipment or spare parts
Source and related models
NOV manufacturer reference for this page. Reviewed 14 November 2026.
Manufacturer and model directory · NOV / Varco equipment overview
